Residential Drywall Installation in Ocala, FL

New drywall for a home in Ocala costs $2.00 to $3.50 per square foot, hung and finished, in 2026. That covers new construction, additions, and remodel rooms, with half-inch board on walls and five-eighths on ceilings. You get the price in writing before the first sheet goes up.

📞 Talk to a Drywall Specialist: (352) 644-9394

Frequently Asked Questions

What is the per-foot price?

$2.00 to $3.50 per square foot, hung and finished to Level 4. Level 5 adds a skim coat for gloss paint or hard side light.

What board goes on ceilings?

Five-eighths inch board in most cases. It sags less and meets fire rules on garage ceilings and walls shared with the house.

Do you hang board in additions?

Yes. Additions are a top call here. We hang once framing and rough-ins pass, and we flag framing that is out of flat before it becomes your wall.

How long does a room take?

Two to four days with dry time for most rooms. Bigger additions run on a schedule we give you in writing.

Is the check free?

Yes. The check and the written bid cost nothing.

What Does My Drywall Project Cost?

Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Ocala, and a calculator built on the same numbers.

Drywall Repair & Patch

Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Ocala — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a wet wall section cut out, dried, and texture-matched (a 4×8 ft section ran $820 flat), long seam cracks (two rooms of ceiling seams re-taped ran $560 flat), and popcorn removal finished smooth (200 sq ft ran $540 flat).

New Drywall Installation

For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.05 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,700 around Ocala.

Room Remodel & Replacement

Tearing out old drywall and hauling it off adds $0.60–$1.20 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,330. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.

Garage Drywall

Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.

Texture, Skim & Paint

On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.80. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,930 for texture and paint together.

What Moves the Price

  • Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
  • Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
  • Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
  • Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
  • Tear-out. Removing old drywall and disposing of it is its own line on the quote.
  • Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.

Estimate Your Project

1 · Pick your project
Your estimated range

Free — no obligation. Your calculator numbers ride along with the request.

Close-up of a worker positioning a drywall panel over wall insulation, part of Residential Drywall Installation work in Ocala, FL
Worker tears out damaged drywall from a water-stained ceiling during a Residential Drywall Installation job in Ocala, FL
Dark stains mark the ceiling drywall as it comes down from above.

One job, start to finish

A family added a primary suite off the back of their house. Once the framing passed inspection, the crew hung the room in a day, taped and coated through the week, and left walls ready for primer while the trim carpenter started next door.

Sample price
$2.00 to $3.50 per sq ft, hung and finished
Sample turnaround
Two to four days per room, with dry time.
Service performed
Residential Drywall Installation
Final price
$2.00 to $3.50 per sq ft, hung and finished
Cost per sq ft
Per sq ft on hang and finish work. Per job on patch work.
Turnaround / duration
Two to four days per room, with dry time.
Payment terms / financing
Set in the written quote.

Signs that point to this service

Not sure which one you have? Run the symptom check.

What the job covers

What it does not cover

Home builds and additions in Ocala

Ocala keeps growing, and most home installation work here is additions, garage conversions, and remodel rooms rather than full new builds. The trap is the same in all three: board hung over studs that are not flat gives wavy walls in side light. We check framing with a long straight edge before the first sheet and shim what needs it. The broader drywall installation page covers commercial and mixed work.

Questions on home installation

Drywall wall surface with a mottled knockdown texture, part of Residential Drywall Installation work in Ocala, FL
Uneven bumps and flattened spots create depth across this Ocala, FL surface.
Two men hoist a drywall sheet up against the wall frame during a Residential Drywall Installation job in Ocala, FL
One worker holds the drywall sheet upright while another works near the ceiling on a ladder.

Need help in Ocala?

Call (352) 644-9394 or send the form. We will tell you plainly what the job needs and what it tends to cost before work starts.

Get a free estimate

📞 (352) 644-9394