Fire-Rated Drywall Installation in Ocala, FL
Fire-rated drywall installation in Ocala runs $2.75 to $4.25 per square foot in 2026. The workhorse is 5/8-inch Type X board, hung and sealed as an assembly — the rating lives in the whole system: board, fasteners, joints, and penetrations, all done the way the code listing says.
Frequently Asked Questions
What makes drywall fire-rated?
Type X board has a glass-fiber-reinforced core that holds together longer in a fire. The rating belongs to the full assembly — board, framing, fasteners, and sealed joints — not the sheet alone.
Does my garage need it?
The wall and ceiling between a garage and the living space need fire separation under Florida code. At the check we tell you exactly which surfaces your garage requires.
Can you bring an unrated garage up to code?
Usually yes — adding Type X over or instead of the existing board on the shared surfaces, with penetrations sealed.
Do rated walls look different when finished?
No. Once finished and painted, a rated wall looks like any other wall. The difference is inside the assembly.
Is the check free?
Yes. The check and the written bid cost nothing.
What Does My Drywall Project Cost?
Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Ocala, and a calculator built on the same numbers.
Drywall Repair & Patch
Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Ocala — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a wet wall section cut out, dried, and texture-matched (a 4×8 ft section ran $820 flat), long seam cracks (two rooms of ceiling seams re-taped ran $560 flat), and popcorn removal finished smooth (200 sq ft ran $540 flat).
New Drywall Installation
For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.05 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,700 around Ocala.
Room Remodel & Replacement
Tearing out old drywall and hauling it off adds $0.60–$1.20 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,330. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.
Garage Drywall
Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.
Texture, Skim & Paint
On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.80. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,930 for texture and paint together.
What Moves the Price
- Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
- Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
- Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
- Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
- Tear-out. Removing old drywall and disposing of it is its own line on the quote.
- Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.
A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.
Estimate Your Project
Measure the damaged section itself — length × width. A full 4×8 sheet section is 32 sq ft.
Spots done in one visit share a single minimum charge.
Price includes tearing out the old drywall and hauling it off.
Includes 5/8″ Type X fire-rated board on the wall shared with the house — and on the ceiling when there is living space above it — as code requires.
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to Ocala Drywall Experts
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the house. Prefer to talk? Call (352) 644-9394.


One job, start to finish
A homeowner finishing a garage learned at permit time that the house-side wall and ceiling needed a rated assembly. The crew hung Type X on the shared wall and ceiling, sealed every penetration, and the inspection passed on the first call.
- Sample price
- $2.75 to $4.25 per sq ft for rated assemblies
- Sample turnaround
- Set by the size of the assembly; most garage walls take two to three days with finish.
- Service performed
- Fire-Rated Drywall Installation
- Final price
- $2.75 to $4.25 per sq ft for rated assemblies
- Cost per sq ft
- Per sq ft on hang and finish work. Per job on patch work.
- Turnaround / duration
- Set by the size of the assembly; most garage walls take two to three days with finish.
- Payment terms / financing
- Set in the written quote.
Signs that point to this service
- A garage wall or ceiling shared with the house
- A permit or inspection note calling for a rated assembly
- A commercial corridor, shaft, or tenant separation wall on the plans
Not sure which one you have? Run the symptom check.
What the job covers
- 5/8-inch Type X board, or multi-layer assemblies where the rating requires
- Fastener patterns and joint treatment per the listed assembly
- Firestop sealing at pipes, ducts, and other penetrations we are scoped for
- Work sequenced so your inspection lands on schedule
What it does not cover
- The permit itself and the engineer’s or architect’s drawings for commercial assemblies.
- Sprinklers, alarms, and other fire systems — those are their own trades.
- Rated doors and hardware, supplied and set by others unless added to the bid.
Rated walls in Ocala garages and build-outs
Most residential rated work here is the garage: Florida code wants fire separation between the garage and the house, and garage finish-outs are one of our top calls. The garage drywall page covers the finish-out as a whole; this page is the rated assembly itself. Commercial corridor and tenant-separation walls follow the same assemblies at larger scale.
Questions on fire-rated work


Need help in Ocala?
Call (352) 644-9394 or send the form. We will tell you plainly what the job needs and what it tends to cost before work starts.
Get a free estimate
Related Services
Commercial Drywall Installation · Commercial Drywall Repair · Drywall Ceiling Repair · Drywall Finishing · Drywall Installation · Drywall Painting and Finishing · Drywall Partition Installation · Drywall Patching · Drywall Repair · Drywall Replacement · Garage Drywall · Metal Stud Framing · Moisture and Mold-Resistant Drywall · Popcorn Ceiling Removal · Residential Drywall Installation · Residential Drywall Repair · Soundproof and Acoustic Drywall · Suspended Ceiling Installation · Taping and Mudding · Texture Matching · Water Damage Drywall Repair