Drywall Installation in Ocala, FL
New drywall in Ocala costs $2.00 to $3.50 per square foot, hung and finished, in 2026. A 12 by 12 foot room with 480 square feet of wall and ceiling runs $960 to $1,680 for the drywall work. We hang half-inch board on walls and five-eighths board on ceilings, tape each seam, and sand to a finish that takes primer well. You get the price in writing before the first sheet goes up.
Frequently Asked Questions
What is the per-foot price?
$2.00 to $3.50 per square foot, hung and finished to Level 4. Level 5 adds a skim coat for gloss paint or hard side light.
What board goes on ceilings?
Five-eighths inch board in most cases. It sags less and meets fire rules in garages.
How long does a room take?
Two to four days with dry time for most rooms.
Can you finish a garage?
Yes. Garage work is a top call here. Fire-rated board goes on the wall by the house, per code.
Is the check free?
Yes. The check and the written bid cost nothing.
What Does My Drywall Project Cost?
Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Ocala, and a calculator built on the same numbers.
Drywall Repair & Patch
Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Ocala — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a wet wall section cut out, dried, and texture-matched (a 4×8 ft section ran $820 flat), long seam cracks (two rooms of ceiling seams re-taped ran $560 flat), and popcorn removal finished smooth (200 sq ft ran $540 flat).
New Drywall Installation
For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.05 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,700 around Ocala.
Room Remodel & Replacement
Tearing out old drywall and hauling it off adds $0.60–$1.20 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,330. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.
Garage Drywall
Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.
Texture, Skim & Paint
On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.80. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,930 for texture and paint together.
What Moves the Price
- Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
- Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
- Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
- Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
- Tear-out. Removing old drywall and disposing of it is its own line on the quote.
- Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.
A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.
Estimate Your Project
Measure the damaged section itself — length × width. A full 4×8 sheet section is 32 sq ft.
Spots done in one visit share a single minimum charge.
Price includes tearing out the old drywall and hauling it off.
Includes 5/8″ Type X fire-rated board on the wall shared with the house — and on the ceiling when there is living space above it — as code requires.
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to Ocala Drywall Experts
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the house. Prefer to talk? Call (352) 644-9394.


One job, start to finish
A spare room went from bare studs to smooth walls in three days. The crew hung half-inch board, taped each seam, and left the room ready for primer.
- Sample price
- $2.00 to $3.50 per sq ft, hung and finished
- Sample turnaround
- Three days with dry time.
- Service performed
- Drywall Installation
- Final price
- $2.00 to $3.50 per sq ft, hung and finished
- Cost per sq ft
- Per sq ft on hang and finish work. Per job on patch work.
- Turnaround / duration
- Three days with dry time.
- Payment terms / financing
- Set in the written quote.
Signs that point to this service
- Bare studs after a gut or a new add-on
- A garage or room you want to finish out
- Old board too far gone to patch
Not sure which one you have? Run the symptom check.
What the job covers
- Board, screws, tape, and compound, all in the per-foot price
- Hang, three finish coats, and sand time, with dry time in each step
- Mold-safe board in baths and laundry rooms, priced as its own line
- Floors masked and the room left clean at the end of each day
What it does not cover
- Paint. The finish is sanded and ready for primer; paint is priced apart.
- Framing repair. Bent or cracked studs get named as a line at the check.
- Permit fees on big remodels, which show at cost on the bid.
New board in Ocala homes
Ocala growth means a lot of garage finish-outs and add-ons. The trap in both is the same: board hung over studs that are not flat gives wavy walls in side light. We check the studs with a long straight edge before the first sheet and shim the bad ones. It adds an hour and saves the finish. The taping and mudding page covers the finish steps in full.
Questions on installation



Need help in Ocala?
Call (352) 644-9394 or send the form. We will tell you plainly what the job needs and what it tends to cost before work starts.
Get a free estimate
Related Services
Commercial Drywall Installation · Commercial Drywall Repair · Drywall Ceiling Repair · Drywall Finishing · Drywall Painting and Finishing · Drywall Partition Installation · Drywall Patching · Drywall Repair · Drywall Replacement · Fire-Rated Drywall Installation · Garage Drywall · Metal Stud Framing · Moisture and Mold-Resistant Drywall · Popcorn Ceiling Removal · Residential Drywall Installation · Residential Drywall Repair · Soundproof and Acoustic Drywall · Suspended Ceiling Installation · Taping and Mudding · Texture Matching · Water Damage Drywall Repair