Moisture and Mold-Resistant Drywall in Ocala, FL

Moisture and mold-resistant drywall installed in Ocala runs $2.25 to $3.75 per square foot in 2026. The board itself adds only a modest premium over standard drywall — and in a Florida bath, laundry room, or leak-prone wall, it is the cheapest insurance in the whole job.

📞 Talk to a Drywall Specialist: (352) 644-9394

Frequently Asked Questions

Is moisture-resistant board waterproof?

No — it resists humid air and occasional splashes far better than standard board, but direct water exposure still calls for tile backer and tile. We will tell you which walls need which.

What is the difference between moisture- and mold-resistant?

Moisture-resistant board (the old “green board” idea) handles damp air. Mold-resistant board adds a treated core and facers that deny mold its food. In Florida baths we reach for mold-resistant.

Does it cost much more?

The board premium is modest — the installed price runs about $0.25 to $0.50 per square foot over standard board in the same room.

Can it go behind a shower?

Not as the tile surface itself. Showers get cement backer behind tile; mold-resistant board serves the rest of the bath.

Is the check free?

Yes. The check, including moisture reads, and the written bid cost nothing.

What Does My Drywall Project Cost?

Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Ocala, and a calculator built on the same numbers.

Drywall Repair & Patch

Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Ocala — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a wet wall section cut out, dried, and texture-matched (a 4×8 ft section ran $820 flat), long seam cracks (two rooms of ceiling seams re-taped ran $560 flat), and popcorn removal finished smooth (200 sq ft ran $540 flat).

New Drywall Installation

For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.05 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,700 around Ocala.

Room Remodel & Replacement

Tearing out old drywall and hauling it off adds $0.60–$1.20 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,330. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.

Garage Drywall

Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.

Texture, Skim & Paint

On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.80. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,930 for texture and paint together.

What Moves the Price

  • Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
  • Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
  • Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
  • Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
  • Tear-out. Removing old drywall and disposing of it is its own line on the quote.
  • Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.

Estimate Your Project

1 · Pick your project
Your estimated range

Free — no obligation. Your calculator numbers ride along with the request.

Worker reaches up to pull down a damaged section of ceiling drywall, part of Moisture and Mold-Resistant Drywall work in Ocala, FL
Workers raise a big sheet of drywall into position in a room during a Moisture and Mold-Resistant Drywall job in Ocala, FL
Moving as a team, workers transport a drywall sheet carefully.

One job, start to finish

A guest bath had grown soft, dark board behind the tub surround twice in ten years. The crew stripped it to the studs, checked the plumbing, and rebuilt with mold-resistant board and the right backer at the wet wall — the third rebuild is the one built to be the last.

Sample price
$2.25 to $3.75 per sq ft installed
Sample turnaround
Baths and laundry rooms: two to four days with dry time.
Service performed
Moisture and Mold-Resistant Drywall
Final price
$2.25 to $3.75 per sq ft installed
Cost per sq ft
Per sq ft on hang and finish work. Per job on patch work.
Turnaround / duration
Baths and laundry rooms: two to four days with dry time.
Payment terms / financing
Set in the written quote.

Signs that point to this service

Not sure which one you have? Run the symptom check.

What the job covers

What it does not cover

The right board for Florida water

Central Florida runs humid most of the year, and Marion County baths without good venting stay wet long after the shower ends. Standard board in those rooms is a countdown. Moisture-rated board is standard practice on our water damage repair rebuilds in wet rooms, and it belongs in every bath and laundry we open up.

Questions on moisture-rated board

Setting a drywall sheet onto wall studs and insulation, part of Moisture and Mold-Resistant Drywall work in Ocala, FL
Careful hands guide the drywall sheet toward the insulated wall section.
A large window lights a room where drywall seams have been taped, part of Moisture and Mold-Resistant Drywall work in Ocala, FL
Window light casts shadows across the freshly taped drywall surface.

Need help in Ocala?

Call (352) 644-9394 or send the form. We will tell you plainly what the job needs and what it tends to cost before work starts.

Get a free estimate

📞 (352) 644-9394