Hole in the Wall: Sizes, Fixes, and Prices

Ocala Drywall Experts repairs holes in drywall in Ocala, FL.

A hole in drywall is a size job. A hole the size of a fist or less gets a backed patch the same way, each time. A big hole gets cut back to sound board and filled with a cut piece of new board.

Small patches run $250 to $450. Large patches run $450 to $900, with texture match priced as its own line.

📞 Talk to a Drywall Specialist: (352) 644-9394

Frequently Asked Questions

What does the symptom check do?

It asks the same first questions a tech asks on the phone, in the same order. Your answers pick the path. At the end you get likely causes, how urgent it is, a rough range, and the service that fits.

Can the check be wrong?

Yes. It sorts by odds, and odds are not a test. That is why ranges are wide and why the wet and sag cases end with "this needs eyes on it" in place of a guess. The check visit buys the real tests.

Does my symptom summary come with my request?

Yes, if you send the form after a check. The summary lists the sign and each answer you gave. The tech reads it on the way, so the first ten minutes of the visit are saved.

What does a patch cost?

Most small patches run $250 to $450. Big patches run $450 to $900. Texture match can add a line. The written price comes before the work.

How much does new drywall cost?

$2.00 to $3.50 per square foot, hung and finished, in 2026. A single room often lands near $900 to $2,400 all in.

How long does a patch take?

One to two visits. Coats need dry time, so most patches span two days.

What Does My Drywall Project Cost?

Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Ocala, and a calculator built on the same numbers.

Drywall Repair & Patch

Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Ocala — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a wet wall section cut out, dried, and texture-matched (a 4×8 ft section ran $820 flat), long seam cracks (two rooms of ceiling seams re-taped ran $560 flat), and popcorn removal finished smooth (200 sq ft ran $540 flat).

New Drywall Installation

For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.05 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,700 around Ocala.

Room Remodel & Replacement

Tearing out old drywall and hauling it off adds $0.60–$1.20 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,330. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.

Garage Drywall

Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.

Texture, Skim & Paint

On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.80. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,930 for texture and paint together.

What Moves the Price

  • Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
  • Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
  • Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
  • Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
  • Tear-out. Removing old drywall and disposing of it is its own line on the quote.
  • Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.

Estimate Your Project

1 · Pick your project
Your estimated range

Free — no obligation. Your calculator numbers ride along with the request.

Hand guiding a taping knife to smooth compound over a drywall seam
Room scene with two workers raising a large drywall panel in Ocala, FL
A Ocala, FL worker holds the drywall sheet in place while a teammate works at the ceiling on a ladder.

How urgent is this?

A plain hole can wait. It needs a fast call only if the hit broke a pipe or a wire, if water runs, or if you smell gas or see sparks. In those cases, shut off the water or the breaker first, then call.

Likely causes, in the order we see them

What you can check, and what to leave alone

Feel the edges of the hole. If the board around it is firm, it is a clean patch job. If the edges are soft or wet, say so when you call: the plan changes.

If the hit broke a pipe or a wire, shut off the water or the breaker and call. Do not patch over a live leak or a cut wire.

What the fix involves

We cut the hole square, set wood backing, and screw in a patch piece. Two to three coats go on with dry time in each step. A test spot sets the texture, then the full blend goes on and the patch is primed. You get the price in writing before the fix starts.

The service that fits

Most hole in the wall calls land on our drywall repair page. Patch holes, fix cracks, and blend the repair into the wall. Price anchor: $250 to $900 per patch.

Need help in Ocala?

Call (352) 644-9394 or send the form. We will tell you plainly what the job needs and what it tends to cost before work starts.

Get a free estimate

📞 (352) 644-9394